| Production capacity | 250 to 300 Pieces / Hour (Full sealing in one operation) |
| Materials to be processed | Gusseted Liner or Tubular Lay Flat Film |
| Low – Density polyethylene | 60-200 micron |
| High – Density polyethylene | 40 - 150 micron |
| Maximum Liner Width | 1400 mm |
| Minimum liner width | 600 mm |
| Bottom sealing | Straight sealing |
| Bottom Sealing die length | 1450 mm |
| Bottom sealing | Temperature controlled sealing die |
| Bottom sealing distance | Fixed |
| Width of the weld (sealing) | 10mm (Bottom sealing) |
| Length Cutting | Cold knife cutting (Motor Drive base) |
| Machine control by | PLC (programmable) with 7” HMI |
| Servo motor | 1.5kw and its drive (Fuji Electric Make) |
| HMI Make | Schneider / Fuji Make |
| PLC Make | Schneider / Fuji Make |
| Temperature controllers | GIC (firm 48 X 48) |
| Electrical Main Panel | Main panel 1 no. |
| Heater | 1700w single phase |
| Bottom sealing unit | Aluminum Die |
| Pneumatic | All Pneumatics are Janatics / Pneumax make |
| Require Man power | 1 Operator + 1 helper |
| Electrical requirements | 415V, 3 Phase with Neutral and Earth, 50HZ |
| Power Consumption | 1700w 1 heater, 1.5kw servo motor, 1.5hp A/C motor, 0.5hp A/C motor |
| Require Air pressure | 8 bars, 1000ltr/minute |
| Films roll lifting | 500 kg max (with web aligner) |
| Space Required | Length 6000mm + working table space extra Width 1900mm Height 1500mm |
| Delivery time | 40 to 50 working days |
